Tuesday, 27 August 2013

Sadie's Craft Project - 81

Sadie's Card Project - 81. 
Craft Creations products used to make this card:
SF13U-44 - Linen Embossed Cream Card Blank.
PK722 - Make & Mend 6” x 6” Paper Pack.
CDT020P - Make & Mend Mannequins Die-Cut Toppers.
CRC255P - Victorian Kitchen 3 A4 Creative Card.
CRC252P - Old Veneer A4 Creative Card.
CRE04C - Dark Brown Creative Cover Card.
MTR10-72 - Champagne 15mm Organza Ribbon.
ZL828U-41 - Glitter Gold Stitch & Sew Peel-Off Stickers.
GEM69 - Pearl Ivory 3mm Bling Bling Gems.
FXO345 - Saddle Brown Flex Marker Pen.
Visit the Craft Creations Shop
Instructions:
Cut a piece of brown card to 189mm x 189mm and stick centrally on to the front of the card. Cut a piece of the veneer card to 180mm x 180mm, colour the white edges with the flex marker pen and stick centrally onto the brown on the card.
Colour the edge of a cream cotton reel paper sheet, mount onto brown card and trim to leave a 2mm border all around. Stick this on to the card, slightly over to the left side as shown.
Cut a strip from the Victorian Kitchen card, 75mm deep x 195mm wide. Stick this onto brown card and trim to leave a narrow border top and bottom edges only. Stick this across the card approximately 35mm from the bottom of the card.
Take a mannequin panel, a birthday panel and a border strip from the CDT sheet, sticking each one to brown card. Trim the border strip to leave a narrow brown border along both long edges and trim the length to fit the card depth. Wrap a piece of the organza ribbon along the centre of the border strip and stick the strip to the card, about 40mm from the fold. Tie a large bow from the ribbon and add to the border just below the centre.
Trim the other panels to leave a narrow brown border on all sides, mount the birthday panel, using sticky fixers, to the top left of the veneer panel, as shown. Mount the mannequin panel, using sticky fixers, over the right half of the cotton reel panel.
Add some of the sewing peel off stickers just peeping out from behind the mannequin and two buttons to the corners of the Happy Birthday panel.
Add a half pearl gem to the corners of the mannequin panel and a row of 3 on the right hand corner of the veneer panel.

Tuesday, 13 August 2013

Jenny's Card Project - 80

Jenny's Card Project - 80. 
Craft Creations products used to make this card:
DCD577 - Purple Romance Decoupage Sheet.
CRC314P - Purple Romance Creative Card.
MIR07PA4 - Purple Mirri Paper.
CNT111CA4 – Lavender Centura Pearl Card.
XL563U-01 and XL564U-01 – Gold Peel-Off Sticker Letters.
Visit the Craft Creations Shop
Instructions:
Fold the sheet of purple romance card in half with the print side out.
Cut 48mm from the right hand edge of the front panel and stick to the inside back panel.
Cut a 5mm wide strip of mirri paper and stick beside the romance card on the back panel.
Stick layer 1 of the decoupage to the mirri paper and trim to leave a 2mm border all around it.
Stick this onto the pearl lavender card and trim to leave a 2mm border around this too.
Stick the panel onto the card front with a 15mm gap to the left and top edge the right edge will overlap the panel and should not be stuck.
Add the rest of the layers to the decoupage design.
Mount the heart and swirl panel from the decoupage sheet on the pearl lavender card leaving a 2mm border.
Add the wording to the small panel using the peel-off letters and stick this, by the left side only, to the front panel as shown in the picture.

Thursday, 8 August 2013

Jenny's Card Project - 79

Jenny's Card Project - 79. 
Craft Creations products used to make this card:
CDT528G - ‘Just For You’ Flower Panel Die-Cut Toppers.
CDX019P - ‘Just For You’ Bottle-Top Banners.
PK724 - ‘Just For You’ 6” x 6” Paper Pack.
SF06U-24 - Dark Green Card Blank.
CRE03CA5 - Dark Green Creative Cover Card.
XL827U-01 - Gold Stitch Borders Peel-Off Stickers.
Visit the Craft Creations Shop
Instructions:
Select the green rose paper and the orange foiled stripe paper from the pack. Trim a strip from the green rose paper to 55mm wide and the stripe paper to 85mm with the stripes going along the length.
Trim both pieces to 138mm deep, stick the peach to the right hand side, leaving a border of about 4mm top, right and bottom.
Stick the green rose paper to the left side, matching the top, left and bottom borders, it should fit perfectly but if it overlaps a little it will not matter.
Add a loopy stitch border to the left edge, place it so a little of the green shows between the paper and border in each loop.
Add another to the right side of the green rose strip.
Stick the green basket panel on to the green card and cut to leave a 2mm border all around it.
Stick to the card using sticky fixers.
Stick the round banner onto green card and cut to leave a narrow border all around that, if you have a paper punch that will do the job, so much the better.
Sticky fix over the bottom corner of the panel.

Jenny's Card Project - 78

Jenny's Card Project - 78. 
Craft Creations products used to make this card:
CDT528G - ‘Just For You’ Flower Panel Die-Cut Toppers.
PK724 - ‘Just For You’ 6” x 6” Paper Pack.
CRC256P - Antique Red Canvas Creative Card.
STG01CA5 - Gold Stardust Glitter Card.
XL817U-01 - Gold Deco Butterfly Corner Peel-Off Stickers.
XL500U-01 - Gold Mixed Width Straight Borders Peel-Off Stickers.
Visit the Craft Creations Shop
Instructions:
Trim the red canvas card to 144mm x 288mm then score and fold in half with the print on the outside to make a card approx. 144mm square.
Select the foiled, striped paper that matches the flower panel background and trim a 55mm wide strip, with the stripes vertical, from one edge.
Stick this strip to the card along the folded edge and trim the height to the card size.
Add a wide gold border along the right hand edge and trim to the card again.
Stick a deco butterfly corner in the two right hand corners of the card.
Stick the flower panel onto the gold stardust card and trim to leave a 2mm border all around it.
Stick this to the card using sticky fixers, placing slightly high and to the right.